Nickel alloys
MU80
High permeability, low coercivity; ideal for magnetic shielding and cores
- Material System
- Nickel Alloy
- Available Forms
- Strip / Foil
- Thickness Range
- 0.05 – 2.00 mm
Material Overview
80Ni-Fe high-permeability alloy strip, annealed to achieve high initial permeability for magnetic shields, transformer cores, and sensor magnetic circuits.
Alias / Benchmark:80Ni-Fe High-Permeability Alloy
Available Forms
Strip · Foil
Thickness / Diameter
0.05 – 2.00 mm
Width
2 – 300 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Minimum Order Quantity
Negotiated by grade, specification, and form. Pilot runs may be arranged in small batches; bulk orders are subject to the official quotation.
Delivery Timeline
Production and inspection schedules will be assessed upon receipt of specifications and quantities; final confirmation subject to formal reply. Extra processing steps apply for ultra-thin and narrow-width specifications.
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Nickel Content | About 80% |
| Saturation Induction | Approx. 0.75 TB |
| Curie temperature | Approximately 460°C |
| Supply Status | Annealing / Cold Rolling |
| Grain Size / Surface Defects | Request inspection records by grade |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
Typical Applications
- Magnetic shield
- Transformer core
- Sensor magnetic circuit
Same category brand
- NiCr8020Operating temperature up to 1200 °C, low resistance temperature coefficient, and resistant to oxidizing and reducing atmospheres.
- Evanohms®Temperature coefficient of resistance: ±10 ppm/°C; thermal EMF vs. copper: 1.0 µV/°C; non-magnetic
- Custantan®Wide-temperature range, stable resistance, corrosion-resistant, easy to solder, high thermoelectric potential with copper