Nickel alloys
Evanohms®
Temperature coefficient of resistance: ±10 ppm/°C; thermal EMF vs. copper: 1.0 µV/°C; non-magnetic
- Material System
- Nickel Alloy
- Available Forms
- Strip / Foil
- Thickness Range
- 0.0025 – 0.50 mm
Material Overview
Nickel-chromium precision resistance alloy with a temperature coefficient of resistance (TCR) of approximately ±10 ppm/°C and a Seebeck potential relative to copper of 1.0 µV/°C. Non-magnetic, resistant to mineral acids and humid environments. Ideal for strain gauges and precision resistors; available as ultra-thin foil starting at 0.0025 mm thickness.
Alias / Benchmark:Ni-Cr-Al-Cu Precision Resistance Alloy
Available Forms
Strip · Foil
Thickness / Diameter
0.0025 – 0.50 mm
Width
1 – 300 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Minimum Order Quantity
Negotiated by grade, specification, and form. Pilot runs may be arranged in small batches; bulk orders are subject to the official quotation.
Delivery Timeline
Production and inspection schedules will be assessed upon receipt of specifications and quantities; final confirmation subject to formal reply. Extra processing steps apply for ultra-thin and narrow-width specifications.
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Tensile Strength Rm (Soft Condition) | 650 – 900 MPa |
| Yield strength Rp0.2 (soft condition) | ≥ 300 MPa |
| Elongation after fracture A50 (annealed condition) | ≥ 30 % |
| Hardness HV (annealed) | 160 – 280 |
| Tensile strength Rm (hard-drawn) | ≥ 1200 MPa |
| Yield strength Rp0.2 (hard-drawn) | ≥ 900 MPa |
| HV Hardness (Hard Condition) | ≥ 350 |
| Density | 8.10 g/cm³ |
| Melting point | 1350 °C |
| Coefficient of Linear Expansion (100 °C) | 13 ×10⁻⁶/°C |
| Thermal Conductivity (20 °C) | 14.6 W/(m·K) |
| Specific Heat (20 °C) | 435 J/(kg·K) |
| Resistivity (20 °C) | 133 μΩ·cm |
| Temperature Coefficient of Resistance (65 – +125 °C) | ±10 ppm/°C |
| Grain Size / Surface Defects | Request inspection records by grade |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
Typical Applications
- Precision Resistor
- Shunt
- Measuring Instruments
Same category brand
- NiCr8020Operating temperature up to 1200 °C, low resistance temperature coefficient, and resistant to oxidizing and reducing atmospheres.
- Custantan®Wide-temperature range, stable resistance, corrosion-resistant, easy to solder, high thermoelectric potential with copper
- Ni200High electrical and thermal conductivity, resistance to alkali and neutral medium corrosion, and excellent deep-drawing performance