Nickel alloys
Custantan®
Wide-temperature range, stable resistance, corrosion-resistant, easy to solder, high thermoelectric potential with copper
- Material System
- Nickel Alloy
- Available Forms
- Strip / Foil
- Thickness Range
- 0.0025 – 0.50 mm
Material Overview
Copper-Nickel 45/55 Resistive Alloy (Constantan): Exhibits minimal resistance variation across a wide temperature range, offers excellent corrosion resistance and ductility, and is easy to solder. When paired with copper, it generates a high thermoelectric potential, making it suitable for thermocouples. Maximum operating temperature is approximately 600 °C. Commonly used in strain gauges, precision resistors, and shunts.
Alias / Benchmark:Cu-Ni44 Constantan
Available Forms
Strip · Foil
Thickness / Diameter
0.0025 – 0.50 mm
Width
1 – 300 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Minimum Order Quantity
Negotiated by grade, specification, and form. Pilot runs may be arranged in small batches; bulk orders are subject to the official quotation.
Delivery Timeline
Production and inspection schedules will be assessed upon receipt of specifications and quantities; final confirmation subject to formal reply. Extra processing steps apply for ultra-thin and narrow-width specifications.
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Tensile Strength Rm (Condition R360) | 360 – 460 MPa |
| Elongation after fracture A50 (annealed condition) | ≥ 25 % |
| Hardness HV (Soft Temper H90) | 90 – 135 |
| Tensile strength Rm (semi-hard R500) | 500 – 700 MPa |
| Hardness HV (Semi-Hard H150) | 150 – 220 |
| Tensile Strength Rm (Hard Condition R740) | ≥ 740 MPa |
| Elastic Modulus | 165 kN/mm² |
| Density | 8.9 g/cm³ |
| Melting point | 1230 – 1290 °C |
| Coefficient of linear expansion (20 – 300 °C) | 14.5 ×10⁻⁶/°C |
| Thermal Conductivity (20 °C) | 21.2 W/(m·K) |
| Resistivity (20 – 500 °C) | 49 μΩ·cm |
| Conductivity | 2 MS/m (3.5% IACS) |
| Maximum Operating Temperature | 600 °C |
| Grain Size / Surface Defects | Request inspection records by grade |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
Typical Applications
- Standard Resistor
- Precision Instruments
- DC measurement circuit
Same category brand
- NiCr8020Operating temperature up to 1200 °C, low resistance temperature coefficient, and resistant to oxidizing and reducing atmospheres.
- Evanohms®Temperature coefficient of resistance: ±10 ppm/°C; thermal EMF vs. copper: 1.0 µV/°C; non-magnetic
- Ni200High electrical and thermal conductivity, resistance to alkali and neutral medium corrosion, and excellent deep-drawing performance