Precision cold rolling · Tianjin

MORE THAN 80 ALLOYS AVAILABLE

Precision Cold Rolling · Ultra-Thin Strip & Foil

From 0.0025mmmm-thick foil to rod and tube with a large diameter of Ø100mm, we integrate precision cold rolling with slitting and straightening into a verifiable delivery path.

Strip and foil thickness
0.0025 – 10 mm
Width
0.3 – 1200 mm
Bar and rod pipe diameter
Ø0.05 – 100 mm
Edge and surface luster of ultra-thin alloy strips after precision cold rolling
0.0025 mm

2005 – 2026

From Stainless Steel Rolling to Specialization in Ultra-Thin Strip

Over the past two decades, our production line has evolved from stainless steel rolling to include nickel alloys, copper alloys, and titanium alloys. In 2020, we shifted our focus to ultra-thin nickel alloy strips.

Rolling mill and stainless steel coil in the precision cold rolling workshop

2026

Multilingual Delivery

Multi-language entry point for alloy, form, and standard selection and delivery, connecting with global precision manufacturing customers.

  1. 2005

    Founded in Tianjin

    Establish a rolling production line in Tianjin, building foundational capabilities across rolling, annealing, and slitting processes.

  2. 2009

    Stainless steel rolling startup

    Transition from stainless steel strip rolling to precision cold rolling, serving customers in springs, clamps, and structural components.

  3. 2014

    Expand Nickel Copper Titanium

    Sequentially introduced nickel, copper, and titanium alloys to establish cold rolling and slitting capabilities across a multi-material system.

  4. 2020

    Deep expertise in nickel alloys

    Focus on nickel alloys to ensure system stability with ultra-thin board profiles, tight tolerances, and high surface quality.

  5. 2024

    Specializing in ultra-thin strips

    Specializing in precision cold rolling of ultra-thin strips for grades such as Evanohms®, Custantan®, and NiCr8020, with thicknesses down to 0.0025mm.

  6. 2026

    Multi-language delivery

    A multilingual gateway for selecting and delivering alloys, forms, and standards—connecting global precision manufacturing customers.

Our values

Four Unchanging Principles

About the Company

01

Precision

Precision

Thickness, width, and flatness are expressed measurably: first the numbers, then the conclusion.

02

quality

Quality

Grade, condition, surface finish, and packaging recorded item by item; batch traceability ensured.

03

innovation

Innovation

Continuously refine process parameters and production line organization to achieve thinner, narrower, and flatter profiles.

04

mastery

Specialize

Focus all capabilities on precision cold rolling, never sacrificing process depth for product variety.

Capability

Six production lines, one delivery path.

Rolling determines thickness and flatness; slitting controls width and edge quality; leveling ensures stability for downstream material use. All three processes are completed on a single production line.

Multi-stand cold rolling with inter-pass annealing controls grain structure and thickness, forming the foundation for ultra-thin strip precision.

  • Set reduction and tension parameters per grade to prevent strip breakage in ultra-thin gauges.
  • Real-time thickness monitoring with per-roll recorded measurements
  • Supports continuous scheduling with slitting and leveling to reduce intermediate handling.
Applicable Thickness
0.0025 – 10 mm
Thickness Tolerance
Negotiated by grade and width; starts at 0.005mm level.
Shape Control
Roll crown + tension closed-loop
Annealing Method
Batch / Continuous Annealing
Surface
Bright / Pickled / Polished

Slitting wide coils into narrow strips: edge quality and width consistency directly determine downstream stamping yield.

  • Narrow edge burr height controlled by application convention
  • Slitting and rolling performed in-house to eliminate external coordination delays.
  • Split by customer roll weight and diameter, compatible with automated production lines.
Minimum Width
0.5 mm
Incoming material width
≤ 1200 mm
Blade shaft
Disc shear: set gap based on thickness
Collect papers
Single or multi-roll, paper or plastic core
Record
Width, Length, and Joint Count per Roll

Multi-roll leveling relieves rolling residual stresses, corrects edge waves, center waves, and buckling, ensuring strip stability during stamping.

  • Minimize springback variation and dimensional drift during stamping.
  • Reduce warping and twisting in slender parts
  • Straightening parameters are saved by grade for easy reordering.
Applicable Thickness
0.02 – 6 mm
Shape improvement
Wave / Mid-wave / Cup-shaped
Roll system
Multi-roll straightening: parameters set by hardness
Detect
Flatness Spot Check + Shipment Record
Assembly Process
Interconnected Slitting and Cleaning

Compliance

Deliver by standard, quote by specification

Products are manufactured according to the ISO 9001 system. The entire product line complies with EU RoHS and WEEE directives; most products meet REACH regulations and align with ASTM/ASME standards.

Certification and test documents are provided based on actual certifications and batch details; they can be requested and verified during the inquiry process. The specific grade is subject to the order confirmation document.

View Technical Support

FAQ

FAQ Before Requesting a Quote

MOQ, inspection documents, and lead time are listed on the Technical Support page alongside other technical questions.

View all technical Q&A
How is the minimum order quantity (MOQ) agreed upon?
Minimum order quantity varies by grade, specification, and form. Trial runs can be negotiated in small batches; bulk orders are subject to the official quotation.
Can you provide the ingredients and performance test report?
Batch-specific component and mechanical property test records are available; specific items and standard numbers will be agreed upon during order confirmation.
How is the lead time determined for ultra-thin specifications?
Thinner thickness and narrower width require more rolling and slitting passes. Lead time is estimated after receiving specifications and quantity, subject to formal confirmation.

Contact

Send us the specifications.

Provide grade, form, dimensions, and quantity. We will respond with feasible solutions and quotes based on standards and manufacturing capabilities.

Inquiry Form

Fields marked with * are required; all others are optional.

By submitting, you agree that we may contact you regarding this request.