Nickel alloys
Kovar
Coefficient of thermal expansion matches borosilicate glass and ceramics; hermetic sealable; nickel-platable
- Material System
- Nickel Alloy
- Available Forms
- Strip / Bar / Tube
- Thickness Range
- 0.01 – 3.00 mm
Material Overview
Iron-nickel-cobalt constant expansion alloy (4J29) has an expansion curve from room temperature to 400 °C that closely matches hard glass and alumina ceramic. It is used for electronic package housings, glass-sealed leads, and vacuum devices.
Alias / Benchmark:4J29 / UNS K94610
Available Forms
Strip · Bar · Tube
Thickness / Diameter
0.01 – 3.00 mm/ Ø3.00 – 80.00 mm
Width
5 – 300 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Minimum Order Quantity
Negotiated by grade, specification, and form. Pilot runs may be arranged in small batches; bulk orders are subject to the official quotation.
Delivery Timeline
Production and inspection schedules will be assessed upon receipt of specifications and quantities; final confirmation subject to formal reply. Extra processing steps apply for ultra-thin and narrow-width specifications.
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Average Expansion Coefficient | 4.5 – 5.2 ×10⁻⁶/℃(20 – 400 ℃) |
| Tensile Strength | ≥ 517 MPa (annealed) |
| Density | 8.36 g/cm³ |
| Sealing Target | Hard Glass / Alumina Ceramic |
| Grain Size / Surface Defects | Request inspection records by grade |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
Typical Applications
- Electronics Enclosure
- Glass-to-metal feedthrough leads
- Vacuum Devices
Same category brand
- NiCr8020Operating temperature up to 1200 °C, low resistance temperature coefficient, and resistant to oxidizing and reducing atmospheres.
- Evanohms®Temperature coefficient of resistance: ±10 ppm/°C; thermal EMF vs. copper: 1.0 µV/°C; non-magnetic
- Custantan®Wide-temperature range, stable resistance, corrosion-resistant, easy to solder, high thermoelectric potential with copper