Nickel alloys
Invar
Low thermal expansion and dimensional stability near room temperature; ideal for precision structural components
- Material System
- Nickel Alloy
- Available Forms
- Strip / Bar
- Thickness Range
- 0.01 – 3.00 mm
Material Overview
Invar alloy (4J36) exhibits minimal dimensional change at room temperature and is used for precision instrument bases, laser cavities, optical supports, and cryogenic structures.
Alias / Benchmark:4J36 / UNS K93600
Available Forms
Strip · Bar
Thickness / Diameter
0.01 – 3.00 mm/ Ø3.00 – 80.00 mm
Width
5 – 300 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Minimum Order Quantity
Negotiated by grade, specification, and form. Pilot runs may be arranged in small batches; bulk orders are subject to the official quotation.
Delivery Timeline
Production and inspection schedules will be assessed upon receipt of specifications and quantities; final confirmation subject to formal reply. Extra processing steps apply for ultra-thin and narrow-width specifications.
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Average Expansion Coefficient | ≤ 1.5 ×10⁻⁶/℃(20 – 100 ℃) |
| Tensile Strength | ≥ 490 MPa (annealed) |
| Density | 8.10 g/cm³ |
| Supply Status | Annealing / Cold Rolling |
| Grain Size / Surface Defects | Request inspection records by grade |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
Typical Applications
- Precision Instrument Base
- Optical support
- Low-temperature structure
Same category brand
- NiCr8020Operating temperature up to 1200 °C, low resistance temperature coefficient, and resistant to oxidizing and reducing atmospheres.
- Evanohms®Temperature coefficient of resistance: ±10 ppm/°C; thermal EMF vs. copper: 1.0 µV/°C; non-magnetic
- Custantan®Wide-temperature range, stable resistance, corrosion-resistant, easy to solder, high thermoelectric potential with copper