Nickel alloys
Incoloy 825
Resistant to sulfuric and phosphoric acids; stress corrosion cracking, pitting
- Material System
- Nickel Alloy
- Available Forms
- Strip / Foil / Tube / Bar
- Thickness Range
- 0.05 – 3.00 mm
Material Overview
Titanium-stabilized nickel-iron-chromium alloy (N08825), resistant to sulfuric acid, phosphoric acid, and chloride-containing media. Used in pickling equipment, flue gas desulfurization systems, and chemical heat exchangers.
Alias / Benchmark:UNS N08825 / 2.4858
Available Forms
Strip · Foil · Tube · Bar
Thickness / Diameter
0.05 – 3.00 mm/ Ø6.00 – 100.00 mm
Width
5 – 600 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Minimum Order Quantity
Negotiated by grade, specification, and form. Pilot runs may be arranged in small batches; bulk orders are subject to the official quotation.
Delivery Timeline
Production and inspection schedules will be assessed upon receipt of specifications and quantities; final confirmation subject to formal reply. Extra processing steps apply for ultra-thin and narrow-width specifications.
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Tensile Strength | ≥ 586 MPa (annealed) |
| Yield Strength | ≥ 241 MPa (annealed) |
| Density | 8.14 g/cm³ |
| Compatible Media | Sulfuric Acid / Phosphoric Acid / Chlorine-Containing Media |
| Grain Size / Surface Defects | Request inspection records by grade |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
Typical Applications
- Pickling Equipment
- Flue Gas Desulfurization Components
- Chemical Heat Exchanger
Same category brand
- NiCr8020Operating temperature up to 1200 °C, low resistance temperature coefficient, and resistant to oxidizing and reducing atmospheres.
- Evanohms®Temperature coefficient of resistance: ±10 ppm/°C; thermal EMF vs. copper: 1.0 µV/°C; non-magnetic
- Custantan®Wide-temperature range, stable resistance, corrosion-resistant, easy to solder, high thermoelectric potential with copper