Nickel alloys
H-C276
Resistant to mixed acids and wet chlorine; resists pitting and crevice corrosion; maintains intergranular corrosion resistance in the heat-affected zone after welding.
- Material System
- Nickel Alloy
- Available Forms
- Strip / Foil / Bar / Tube
- Thickness Range
- 0.01 – 3.00 mm
Material Overview
Nickel-Molybdenum-Chromium-Tungsten Alloy (UNS N10276) cold-rolled strip and bar/tube products. Low carbon content ensures corrosion resistance in the weld heat-affected zone, making them ideal for severe corrosive environments such as flue gas desulfurization, chemical reactors, and pollution control systems.
Alias / Benchmark:Hastelloy® C-276 / UNS N10276
Available Forms
Strip · Foil · Bar · Tube
Thickness / Diameter
0.01 – 3.00 mm/ Ø6.00 – 100.00 mm
Width
5 – 600 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Minimum Order Quantity
Negotiated by grade, specification, and form. Pilot runs may be arranged in small batches; bulk orders are subject to the official quotation.
Delivery Timeline
Production and inspection schedules will be assessed upon receipt of specifications and quantities; final confirmation subject to formal reply. Extra processing steps apply for ultra-thin and narrow-width specifications.
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Tensile Strength | ≥ 690 MPa (annealed) |
| Yield Strength | ≥ 283 MPa (annealed) |
| Density | 8.89 g/cm³ |
| Applicable Operating Conditions | Wet Chlorine / Mixed Acid / Flue Gas Desulfurization |
| Grain Size / Surface Defects | Request inspection records by grade |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
Typical Applications
- Flue Gas Desulfurization Components
- Chemical Reactor
- Equipment for Wet Chlorine Environments
Same category brand
- NiCr8020Operating temperature up to 1200 °C, low resistance temperature coefficient, and resistant to oxidizing and reducing atmospheres.
- Evanohms®Temperature coefficient of resistance: ±10 ppm/°C; thermal EMF vs. copper: 1.0 µV/°C; non-magnetic
- Custantan®Wide-temperature range, stable resistance, corrosion-resistant, easy to solder, high thermoelectric potential with copper