Copper alloys
C36000
Excellent machinability, stable dimensional accuracy, and ideal for automatic lathes.
- Material System
- Copper Alloy
- Available Forms
- Bar
- Thickness Range
- Confirm on demand
Material Overview
Free-machining brass bar stock with short chips and smooth surface finish. Ideal for precision fittings, valve components, and high-volume turning operations.
Alias / Benchmark:Free-cutting Brass
Available Forms
Bar
Thickness / Diameter
Confirm on demand/ Ø3.00 – 80.00 mm
Width
Confirm on demand
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Minimum Order Quantity
Negotiated by grade, specification, and form. Pilot runs may be arranged in small batches; bulk orders are subject to the official quotation.
Delivery Timeline
Production and inspection schedules will be assessed upon receipt of specifications and quantities; final confirmation subject to formal reply. Extra processing steps apply for ultra-thin and narrow-width specifications.
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Tensile Strength | 340 – 500 MPa |
| Machinability | Superior to standard brass |
| Supply Status | Stretch / Compress |
| Diameter Tolerance | By standard or drawing |
| Grain Size / Surface Defects | Request inspection records by grade |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
Typical Applications
- Precision Fittings
- Valve Parts
- Batch Turning Parts
Same category brand
- CuBe2High strength and high elasticity, excellent electrical and thermal conductivity, age-hardenable
- CuBe2 HardenedSupplied in work-hardened condition; high strength after forming with minimal springback
- CuNi2BeHigher electrical conductivity than CuBe2, stress-relaxation resistant, supplied in the work-hardened (rolled) condition.