Copper alloys
CuBe2
High strength and high elasticity, excellent electrical and thermal conductivity, age-hardenable
- Material System
- Copper Alloy
- Available Forms
- Strip / Bar / Wire
- Thickness Range
- 0.03 – 3.00 mm
Material Overview
Beryllium Copper Alloy 25 (C17200 / CW101C) Strip and Wire/Bar – High elastic limit; aging after forming significantly boosts strength. Ideal for connector terminals, switch springs, and precision mechanical spring components.
Alias / Benchmark:Alloy 25 / C17200 / CW101C
Available Forms
Strip · Bar · Wire
Thickness / Diameter
0.03 – 3.00 mm/ Ø1.00 – 60.00 mm
Width
2 – 400 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
起订量
随牌号、规格与形态协商;试制阶段可按小批量安排,批量订单以正式报价单为准
交付周期
收到规格与数量后评估排产与检测安排,以正式回复为准;超薄与窄幅规格工序更多
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Tensile Strength | 1000 – 1400 MPa (aged condition) |
| Conductivity | 18 – 25 % IACS |
| Hardness | HRC 36 – 42 |
| Supply Status | Solution-treated (before aging) / Cold-worked |
| Grain Size / Surface Defects | 可按牌号索取检测记录 |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
Typical Applications
- Connector terminal
- Switch blade
- Precision Elastic Components
Same category brand
- CuBe2 HardenedSupplied in work-hardened condition; high strength after forming with minimal springback
- CuNi2BeHigher electrical conductivity than CuBe2, stress-relaxation resistant, supplied in the work-hardened (rolled) condition.
- C10100Oxygen-free high conductivity, low hydrogen embrittlement risk, excellent machinability and weldability