Copper alloys
C26000
Excellent deep drawability, balanced strength and ductility, smooth surface finish
- Material System
- Copper Alloy
- Available Forms
- Strip / Foil
- Thickness Range
- 0.03 – 2.00 mm
Material Overview
Copper-zinc alloy (70/30) strip with excellent cold forming and deep drawing properties, commonly used for cartridge cases, drawn shells, decorative components, and hardware fittings.
Alias / Benchmark:Brass Casings 70/30
Available Forms
Strip · Foil
Thickness / Diameter
0.03 – 2.00 mm
Width
3 – 600 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Minimum Order Quantity
Negotiated by grade, specification, and form. Pilot runs may be arranged in small batches; bulk orders are subject to the official quotation.
Delivery Timeline
Production and inspection schedules will be assessed upon receipt of specifications and quantities; final confirmation subject to formal reply. Extra processing steps apply for ultra-thin and narrow-width specifications.
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Tensile Strength | 300 – 500 MPa (by status) |
| Elongation | ≥ 40% (soft state) |
| Supply Status | Soft / Semi-hard / Hard |
| Surface | Bright / Polished |
| Grain Size / Surface Defects | Request inspection records by grade |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
Typical Applications
- Deep-drawn shell
- Trim
- Hardware
Same category brand
- CuBe2High strength and high elasticity, excellent electrical and thermal conductivity, age-hardenable
- CuBe2 HardenedSupplied in work-hardened condition; high strength after forming with minimal springback
- CuNi2BeHigher electrical conductivity than CuBe2, stress-relaxation resistant, supplied in the work-hardened (rolled) condition.