Copper alloys
C12200
Good phosphorus-deoxidized, weldable, brazable, and corrosion-resistant
- Material System
- Copper Alloy
- Available Forms
- Strip / Tube / Bar
- Thickness Range
- 0.05 – 3.00 mm
Material Overview
Phosphorus-deoxidized copper (DHP) strip and tube: Residual phosphorus enhances weldability for heat exchanger tubes, water supply piping, and condenser components.
Alias / Benchmark:Phosphorus-deoxidized copper DHP
Available Forms
Strip · Tube · Bar
Thickness / Diameter
0.05 – 3.00 mm/ Ø4.00 – 80.00 mm
Width
3 – 600 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
起订量
随牌号、规格与形态协商;试制阶段可按小批量安排,批量订单以正式报价单为准
交付周期
收到规格与数量后评估排产与检测安排,以正式回复为准;超薄与窄幅规格工序更多
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Conductivity | ≥ 80 % IACS |
| Tensile Strength | ≥ 205 MPa (annealed) |
| Phosphorus content | 0.015 – 0.040 % |
| Supply Status | Soft / Semi-hard |
| Grain Size / Surface Defects | 可按牌号索取检测记录 |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
Typical Applications
- Heat exchange tube
- Water supply pipe
- Condenser Component
Same category brand
- CuBe2High strength and high elasticity, excellent electrical and thermal conductivity, age-hardenable
- CuBe2 HardenedSupplied in work-hardened condition; high strength after forming with minimal springback
- CuNi2BeHigher electrical conductivity than CuBe2, stress-relaxation resistant, supplied in the work-hardened (rolled) condition.