Other alloys
1.2709
High-strength, dimensionally stable, and tough after age hardening
- Material System
- Other alloys
- Available Forms
- Strip / Bar
- Thickness Range
- 0.10 – 6.00 mm
Material Overview
Martensitic aging steel strips and bars exhibit minimal thermal deformation during heat treatment, making them ideal for precision molds, aerospace structural components, and high-load elastic parts.
Alias / Benchmark:18Ni Maraging Steel
Available Forms
Strip · Bar
Thickness / Diameter
0.10 – 6.00 mm/ Ø3.00 – 100.00 mm
Width
10 – 600 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Minimum Order Quantity
Negotiated by grade, specification, and form. Pilot runs may be arranged in small batches; bulk orders are subject to the official quotation.
Delivery Timeline
Production and inspection schedules will be assessed upon receipt of specifications and quantities; final confirmation subject to formal reply. Extra processing steps apply for ultra-thin and narrow-width specifications.
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Tensile Strength | 1800 – 2000 MPa (aged condition) |
| aging temperature | Approximately 480°C |
| Supply Status | solution state |
| Grain Size / Surface Defects | Request inspection records by grade |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
Typical Applications
- Precision Molds
- Aerospace structural components
- High-load elastic components
Same category brand
- 1.4310High elasticity, excellent atmospheric corrosion resistance, and significant cold-work hardening
- 316 StainlessMolybdenum-containing, pitting and chloride-resistant, excellent formability and weldability
- 316L StainlessUltra-low carbon, intergranular corrosion resistant after welding, excellent deep-draw formability